Samsung Washer CL: Official Meaning and Checks
Direct answer
What CL means
Official Samsung material describes CL as On newer models, CL displays when Child Lock mode has drained water from the tub (when Child Lock is on, the tub water level is unsafe, and the door was opened). This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.
Before you begin
Safety first
Not applicable (normal state).
- Record the complete displayed code and the full model number before clearing the display.
- Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
- Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.
Does this guide apply?
- Region
- United States
- Product family
- Samsung front-load washing machines with a digital display; models without a digital display show error codes as blinking-light combinations
- Exact models
- Not listed in the cited source. Confirm the full model in the official manual.
- Scope note
- The cited source scope is Samsung front-load washing machines with a digital display; models without a digital display show error codes as blinking-light combinations. Confirm the complete model number before applying the guidance; an empty model list does not imply all models.
Find the model label and official manual before ordering a part
Common paths to check
These are source-backed possibilities, not probability estimates for your specific unit.
- 01 Official source meaning: On newer models, CL displays when Child Lock mode has drained water from the tub (when Child Lock is on, the tub water level is unsafe, and the door was opened).
Decision path
Safe checks, in order
- 1
Confirm code and model scope
Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.
Expected: The official source explicitly covers the displayed code and product family.
If not resolved: Contact manufacturer support with the full model and serial number.
- 2
Follow the official owner checks
Turn the washer off and back on, or turn off Child Lock.
Expected: Only the user-accessible condition identified by the official source is corrected.
If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.
Reset and test
- Yes (power off/on or disable Child Lock).
Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.
Escalation point
Stop and arrange service when
- Not applicable (normal state).
- The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.
Model-first repair planning
Components that may be involved
The items below describe the documented diagnostic path. They are not a diagnosis and do not identify a compatible replacement part without the complete model and original part number.
- None.
Official sources
We paraphrase manufacturer material and show the publication scope so you can verify it.
- Washing machine displays an error code (SW1) - Full error-code list (water level/leakage, filling, hot/cold, drain, overflow, buttons, voltage, door, detergent drawer, suds, Add… Samsung · CL · accessed 2026-08-08
Reviewed by Device Fix Guide · Last source check:
Related guides for this equipment
These links share the same brand and equipment family. A related guide does not prove that the codes have the same cause on your model.
Did this guide match your model?
Report a mismatch, missing model family or outdated manufacturer source. Include the page URL and an official manual link, but do not send a serial number or personal information.
Report a correction