GE Appliances Oven Range ERR: Official Meaning and Checks
Direct answer
What ERR means
Official GE Appliances material describes ERR as There has been an invalid entry when setting the oven controls. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.
Before you begin
Safety first
Not applicable (input/setting issue).
- Record the complete displayed code and the full model number before clearing the display.
- Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
- Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.
Does this guide apply?
- Region
- United States
- Product family
- GE ranges and wall ovens with electronic oven controls and Fahrenheit/Celsius selection.
- Exact models
- Not listed in the cited source. Confirm the full model in the official manual.
- Scope note
- The cited source scope is GE ranges and wall ovens with electronic oven controls and Fahrenheit/Celsius selection.. Confirm the complete model number before applying the guidance; an empty model list does not imply all models.
Find the model label and official manual before ordering a part
Common paths to check
These are source-backed possibilities, not probability estimates for your specific unit.
- 01 Official source meaning: There has been an invalid entry when setting the oven controls.
Decision path
Safe checks, in order
- 1
Confirm code and model scope
Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.
Expected: The official source explicitly covers the displayed code and product family.
If not resolved: Contact manufacturer support with the full model and serial number.
- 2
Follow the official owner checks
Retry the entry; if the oven cannot be set above 290 degrees and ERR appears, the oven is set for Celsius - change to Fahrenheit: press the BAKE and BROIL HI/LO pads together for 3-5 seconds until the display shows SF; press the COOK TIME and BROIL HI/LO pads together (on some models press BROIL only) until F shows; press START to complete the change.
Expected: Only the user-accessible condition identified by the official source is corrected.
If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.
Reset and test
- Yes (official Fahrenheit/Celsius change procedure).
Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.
Escalation point
Stop and arrange service when
- Not applicable (input/setting issue).
- The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.
Model-first repair planning
Components that may be involved
The items below describe the documented diagnostic path. They are not a diagnosis and do not identify a compatible replacement part without the complete model and original part number.
- None.
Official sources
We paraphrase manufacturer material and show the publication scope so you can verify it.
- Range & Wall Oven - Oven Error, Fault or Function Codes GE Appliances · ERR · accessed 2026-08-08
Reviewed by Device Fix Guide · Last source check:
Related guides for this equipment
These links share the same brand and equipment family. A related guide does not prove that the codes have the same cause on your model.
Did this guide match your model?
Report a mismatch, missing model family or outdated manufacturer source. Include the page URL and an official manual link, but do not send a serial number or personal information.
Report a correction