Amana Washer HC: Official Meaning and Checks
Direct answer
What HC means
Official Amana material describes HC as Did you receive an HC error code at the end of your cycle? If HC (hot and cold hoses reversed) appears in display, it means the hot and cold inlet hoses have been installed incorrectly. This guide records the cited product-family scope, safety-reviewed owner checks, and service limits.
Before you begin
Safety first
Safety review is complete for the owner-accessible checks shown here. Do not remove panels, bypass controls, or test live circuits.
- Record the complete displayed code and the full model number before clearing the display.
- Disconnect power before touching a user-accessible filter, hose, burner, or electrical connection.
- Stop using the equipment if it leaks, smells burned or of gas, smokes, sparks, or trips a breaker.
Does this guide apply?
- Region
- United States
- Product family
- Top Load Washer (URL category: Laundry/Washers/TopLoadWasher/ErrorCodesorFlashingLights/OtherErrorCodes)
- Exact models
- Not listed in the cited source. Confirm the full model in the official manual.
- Scope note
- The cited source scope is Top Load Washer (URL category: Laundry/Washers/TopLoadWasher/ErrorCodesorFlashingLights/OtherErrorCodes). Confirm the complete model number before applying the guidance; an empty model list does not imply all models.
Find the model label and official manual before ordering a part
Common paths to check
These are source-backed possibilities, not probability estimates for your specific unit.
- 01 Official source meaning: Did you receive an HC error code at the end of your cycle? If HC (hot and cold hoses reversed) appears in display, it means the hot and cold inlet hoses have been installed incorrectly.
Decision path
Safe checks, in order
- 1
Confirm code and model scope
Compare the complete display and full model number with the cited manufacturer page or manual before applying any troubleshooting instruction.
Expected: The official source explicitly covers the displayed code and product family.
If not resolved: Contact manufacturer support with the full model and serial number.
- 2
Follow the official owner checks
This code will appear at the end of the wash cycle to indicate that the cold water hose is connected to the hot water inlet and the hot water hose is connected to the cold water inlet. Turn off the water supply and reverse the hoses. Run another cycle to verify that the hoses are correct. For questions regarding the hose installation, see Installation Instructions.
Expected: Only the user-accessible condition identified by the official source is corrected.
If not resolved: Stop repeated resets and arrange qualified service if the code returns or the source directs service.
Reset and test
A user reset is not documented for this condition.
Important: A reset may clear the display but cannot repair the underlying condition; follow only the exact model-specific manufacturer procedure.
Escalation point
Stop and arrange service when
- The code returns after the cited user-accessible checks or the official source directs professional service.
- The equipment leaks, smells burned or of gas, smokes, sparks, overheats, or trips a breaker.
Model-first repair planning
Components that may be involved
The items below describe the documented diagnostic path. They are not a diagnosis and do not identify a compatible replacement part without the complete model and original part number.
- hose
Official sources
We paraphrase manufacturer material and show the publication scope so you can verify it.
- HC - Error Code, section: Possible Solutions body Amana · HC (Top Load Washer); source fingerprint 816c77cf6b5916da8df04f147c9f5fdf720539ab82eda2224dbdf4c2434bb80a (SHA-256 of page body text) · accessed 2026-08-08
Reviewed by Device Fix Guide · Last source check:
Related guides for this equipment
These links share the same brand and equipment family. A related guide does not prove that the codes have the same cause on your model.
Did this guide match your model?
Report a mismatch, missing model family or outdated manufacturer source. Include the page URL and an official manual link, but do not send a serial number or personal information.
Report a correction