Brand guide
Frigidaire Error Codes: Meanings & Safe Checks
Match the equipment family and displayed code before following any check.
Frigidaire air conditioner AS means Room temperature thermistor failed Please try resetting the unit by unplugging it from the power source for up to 30…
Frigidaire lists EC for Room air conditioners and describes it as: Communications error.
Frigidaire air conditioner ES means Indoor defrost thermistor failure or Humidity sensor failure Please try resetting the unit by unplugging it from the…
Frigidaire air conditioner F1 means Freeze protection engaged Please try resetting the unit by unplugging it from the power source for up to 30 seconds,…
Frigidaire air conditioner F2 means Freeze protection Allow the unit to defrost for 5 minutes, if the error code returns after resetting the unit, please…
Frigidaire air conditioner HS means Air discharge thermistor failed Please try resetting the unit by unplugging it from the power source for up to 30…
Frigidaire lists LC for Room air conditioners and describes it as: Communication error between indoor/outdoor units.
Frigidaire air conditioner P1 means This indicates the bottom tray is full Carefully move the unit to a drain location, remove the bottom drain plug and let…
Frigidaire air fryer E1 means The temperature sensor has disconnected. See the verified model scope, safe checks, and official source.
Frigidaire air fryer E2 means The temperature sensor has malfunctioned. See the verified model scope, safe checks, and official source.
Frigidaire cooktop F12 means Micro Identification. See the verified model scope, safe checks, and official source.
Frigidaire cooktop F13 means EEPROM Failure. See the verified model scope, safe checks, and official source.
Frigidaire cooktop F3 means Communication Error. See the verified model scope, safe checks, and official source.
Frigidaire cooktop F30 means Open Probe. See the verified model scope, safe checks, and official source.
Frigidaire cooktop F31 means Shorted Probe. See the verified model scope, safe checks, and official source.
Frigidaire cooktop F40 means Cooktop Lock Out. See the verified model scope, safe checks, and official source.
Frigidaire cooktop F90 means Door Lock Issue. See the verified model scope, safe checks, and official source.
Frigidaire lists AS, ES, F1, F2, L1, F5 for Dehumidifiers and describes it as: A temperature or humidity sensor has failed.
Frigidaire lists E4, C5 for Dehumidifiers and describes it as: Electronic Control Failure.
Frigidaire lists EC, F0 for Dehumidifiers and describes it as: Sealed system failure.
Frigidaire dehumidifier H3 means H3 or E5 indicates the Compressor Overload Protection Check installation for proper clearance.
Frigidaire dehumidifier PU means PU indicates there is a Failure to pump out bucket.
Frigidaire dishwasher 01 means 24 indicates that the delay option has been enabled and will begin the cycle once the displayed time reaches 0.
Frigidaire dishwasher CL means Description Error code CL or Cd indicates that the door has not been successfully closed and latched.
Frigidaire dishwasher Hd means Hd or HO indicates the unit is in the "Heat Delay" or "Heater On" mode.
Frigidaire dishwasher i20 means i20 indicates that the dishwasher is not draining properly.
Frigidaire dishwasher i40 means i40 indicates a clogged filter or sump. See the verified model scope, safe checks, and official source.
Frigidaire dishwasher PF means PF occurs when there is a loss of power. See the verified model scope, safe checks, and official source.
Frigidaire oven range F1 means Shorted Key Pad. See the verified model scope, safe checks, and official source.
Frigidaire oven range F10 means Thermal Runaway. See the verified model scope, safe checks, and official source.
Frigidaire lists F20 Or F3 for Ovens and ranges and describes it as: Communication Error.
Frigidaire lists F31 for Ovens and ranges and describes it as: Shorted Probe. Confirm the complete model number before applying this device-family guidance.
Frigidaire lists F90 Or F91 Or F92 Or F93 Or F94 for Ovens and ranges and describes it as: Door Lock Issue.
Frigidaire refrigerator DI means Description Indicates there is ice jammed in the shoot.
Frigidaire refrigerator H means Description High temp will illuminate next to clear alerts button.
Frigidaire refrigerator PF means Description Indication of power outage or power surge.
Frigidaire refrigerator SB means Description: The Sabbath Mode is a feature that disables portions of the refrigerator and its controls in accordance with…
Frigidaire washer CL means CL means the unit lid is open for more than 20 seconds with control lock activated.
Frigidaire washer E1 means E1 means water is not entering washer or slow water fill time.
Frigidaire washer E2 means E2 means water takes too long to drain or is not draining properly.
Frigidaire washer E3 means E3 means wash lid is either open or the lid lock failed.
Frigidaire washer E4 means E4 means the unit is out of balance during spin operation.
Frigidaire washer E5 means E5 means the unit is not level. See the verified model scope, safe checks, and official source.
Frigidaire washer F2 means F2 Error Code F2 indicates there is too much soap or wrong type of soap.